Design:

Plastic housing for switch panel mounting

Degree of Protection – front:

NEMA4 for usage in confined spaces (corresponds to the degree of protection IP66)

Degree of Protection – back:

Degree of protection according to IEC standard: IP20

Clamps:

Degree of protection according to IEC standard: IP20

Dimensions:

96 x 96 x 115 mm (WxHxD)

Front panel:

92 x 92 mm (WxH)

Connection:

Screw connection. Wire cross section max. 2.5 mm

Auxiliary voltage:

100 … 240 Vac, -15 + 10%, 50/60 Hz

Power consumption:

Approx. 16 VA

Climate storage:

-10 … + 70 ° C

Operation:

0 … + 50 ° C, 5 … 95% rel. moisture, non- condensing

Display:

Two 4-digit seven-segment displays for PV and SV

Heights of digits:

PV = 15 mm red
SV = 11mm green

Input 1:

Thermocouple types K, J, T, E, L, U, N, R, S, B, W or PLII
Resistance thermometer JPt 100, PT100
Voltage input: 0 … 5 V, 1 … 5 V, 1 … 10 V, (Ri> = 1 MOhm)
Current input: 0 … 20 mA, 4 … 20 mA (Ri = 150 Ohm)

Input 2:

Decentralized set value 4…20 mA (Ri = 150 Ohm)

Controller output:

(depending on integrated module)

Relay output:

(potential-free contact)

Voltage output:

(active, pulse, 12 Vdc or 24 Vdc [NPN] / 24 Vdc [PNP])

Current output:

(continuous 4 … 20 mA or 0 … 20 mA)

Alarm output:

Max. 3 alarm outputs each with 11 different alarm modes (with two-point controller)

Setting:

Digital adjustment with function keys
Control behavior: ON/OFF or PID-control with auto tuning
Proportional part: 0.1 … 999.9 %
FS Integral time: 0 … 3999 s
Differential: 0 … 3999 s

Other features:

Sensor calibration
Adjustable switching frequency (output cycle)
Selectable output for standard and reverse operation
Upper and lower limit for set value
Modulating controller configurable