APPLICATIONS:
FUNCTION
The KE oxygen probe is suitable for direct installation in the furnace atmosphere and is maintenance-free. The emf output corresponds to the Nernst voltage. The probe temperature is recorded by a PtRh-Pt thermocouple.
The oxygen probe is suitable for direct connection to all well-known C-level control systems (e.g. MCON Carbo).
The probe delivers a continuous measuring signal and is characterized by a fast response time.
The current one is derived from the Nernst probe voltage and the EMF of the thermocouple.
Calculated carbon content of the furnace atmosphere.
The remaining service life of the probe can easily be determined from the reproducible internal resistance.
TECHNICAL SPECIFICATIONS:
| Sensing element: | Continuous zirconia tube |
|---|---|
| Measuring range: | 1 … 10 -28 bar partial pressure |
| response time | approx. 1 second. |
| Working temperature: | 700 … 1050 ° C |
| Thermocouple: | Pt10Rh-Pt type “S”, DIN 43710 |
| Protection tube: | Heat-resistant steel or according to customer requirements |
| Nominal length: | 600 mm special lengths up to 1200 mm |
| Installation thread: | 1 “G |
| Connection: | Clamping sockets and plugs separated for probe and thermocouple |
| Connection for air lines: | Reference air and purge air |
Address
Johann-Flitsch-Strasse 2
83075 Bad Feilnbach
Follow
